OSKI 102 skis: topsheet graphic, base, and side profile
OSKI 102 tips, topsheet graphic detail
OSKI 102 tails, topsheet graphic detail
OSKI 102 side profile showing tip and tail rocker
OSKI 102 skis: topsheet graphic, base, and side profile
OSKI 102 tips, topsheet graphic detail
OSKI 102 tails, topsheet graphic detail
OSKI 102 side profile showing tip and tail rocker

OSKI 102

Full-steam freestyle powerhouse.

The Oski 102 is a full-steam freestyle powerhouse: a 102mm park and all-mountain twin engineered with Oscar Weary for his debut pro model.

Built from a modified Jeffrey shape and tuned around Oscar’s skiing, the Oski pairs Ripper Rocker with a soft-yet-stout flex, a mount point 2cm behind center, and a Hybrid Sidecut with more symmetrical radii from tip to tail. The result is a rounder feel through forward and switch carves, better balance in the air, and harder carving when the ski is engaged. These fire-breathing locomotives stay on rails through every turn in any terrain. All aboard the Oski Express. The hype train has arrived.

$799.00
/
Length
Only 2 left.
Add bindingsBrakes shown fit the 102 mm waist. ClampCombo saves $50 at checkout.
Added LOOK Pivot 2.0 15 GW 105mm brake. DIN 6 to 15 $499.95

Find your length

Add your height and weight.

Every Oski 102 is built with our custom 2800 hybrid fiberglass/carbon, our proprietary composite weave that improves strength and durability while decreasing weight. Add our 100% bamboo core, full-length UHMW sidewalls, and the thickest bases and edges in skiing, and you have one of the most versatile and durable freestyle skis on the mountain.

Want it in your size, rocker profile, and graphic? Build it custom, from $1,099.

Handbuilt in Portland, Oregon

Since day one, every pair of ON3P skis has been built by hand in our NE Portland factory, a space we designed and built out ourselves. Every topsheet, base, and core goes from concept to finished ski under one roof, by a small crew of ski builders.

Two-year warranty

We stand behind every pair we build. Every ski carries a two-year warranty against defects in materials and workmanship.

Thickest bases and edges in skiing

Every stock ski is built with a 1.8mm Durasurf base and 2.5mm x 2.5mm hardened steel edges, the thickest base and edges in skiing. More base and edge to absorb impacts, rock shots, and retunes means more seasons of hard skiing.

Pay in installments

Split your purchase into payments with Shop Pay Installments. Options appear at checkout.

LengthTipWaistTailRadiusEffective edgeMount from centerWeight per ski
171 cm 128102125 18.9 m1355 mm -2 cm 1760 g
176 cm 129102126 19.6 m1400 mm -2 cm 1860 g
181 cm 130102127 20.2 m1445 mm -2 cm 1940 g
186 cm 131102128 20.8 m1490 mm -2 cm 2060 g
Updates for 26/271 item
  • VDS rubber. Two additional layers in the tips and tails for increased strength and durability

Is the Oski 102 your ski

The Oski 102 is your ski if
Consider instead
You like the versatility of the Jeffrey but need a more park-oriented mount and sidecut
Mango 102Choose it for a softer flex, easier butters, and a more playful park feel
You want strong edge hold, pop, and support through hard landings
Jeffrey 98Choose it for a progressive mount, increased playfulness, and a more versatile all-mountain balance
You prefer a close-to-center mount but want more than just a buttery ski
Jeffrey 92Choose it for a tighter turn shape, quicker edge to edge, and more precision on hard snow

Ski design

Rocker profile
Ripper Rocker

Ripper Rocker is the hard-snow counterpart to Signature Rocker: shorter tip and tail rocker, lower tip and tail heights, and higher camber, which adds edge hold on hardpack, more pop, and stability at speed and on landings. Stable, powerful, and precise. On the Oski 102, this profile puts more ski on the snow, so hard landings stick, takeoffs pop, and the ski carves with speed and intent when you take your skills to the whole mountain.

Ripper rocker profile
Sidecut design
Hybrid Sidecut

This sidecut consists of an elliptical arc that begins at boot center and gets progressively smaller as it extends toward the tip, with a traditional radius in the tail, resulting in a ski that carves harder the more it is put on edge, while remaining comfortable at speed and allowing the rider to control the turn shape. On the Oski 102, the elliptical tip pulls the ski into a carve on edge, while the traditional tail keeps it calm at speed. When running flat, it tracks straight in and out of park features and when bombing down the mountain.

Hybrid Sidecut

ON3P SKI CONSTRUCTION

Cross section of an ON3P ski showing its layers
1
2
3
4
5
6
7
8

100% Bamboo Core

The heart of every stock ON3P is a vertically laminated, 100% bamboo core, cut and laminated in our Portland shop. Exceptionally strong, technically a grass, and the backbone of our trademark feel since day one: damp, powerful, responsive.

1.8mm Durasurf Base

Every stock ski runs a 1.8mm Durasurf 4001 base, the thickest base in skiing. More material means more glide, more protection from rock strikes, and more stone grinds before the ski is done.

2.5mm x 2.5mm Ski Edge

Our 2.5mm x 2.5mm Rockwell 48 steel edges are the thickest edges in skiing. The 3/4 wrap lets the tips flex, which lowers the risk of delamination where skis take the most abuse.

Full Length UHMW Sidewall

Full length, full height UHMW sidewalls are more abrasion resistant than steel while still allowing torsional flex. Ultra High Molecular Weight Polyethylene is the same material used in armored vehicles, and it absorbs and resists impact better than any other sidewall material we have tested (sorry, ABS).

(3) Layers of VDS

Three layers of VDS rubber run along the edges and sidewalls as a shear layer, improving bond strength between materials and damping vibration through the ski.

2800 Hybrid Composite

Our proprietary custom weave, a triaxial fiberglass and carbon composite, runs 4-inch wide stringers the full length of the ski for balanced torsional and longitudinal stiffness: all the pop you can handle, without added weight.

ISOSPORT 8210 Pi19 Topsheet

Every ON3P topsheet is sublimated in-house and hand-sanded, so every graphic is printed in our building and finished by hand to look better for longer.

Extra Wide Binding Mat

An additional layer of double-bias fiberglass under the binding zone increases screw retention and prevents pullouts. We run the mat full width on every ski, so any hole pattern lands on reinforced material, with added torsional stiffness and power transfer underfoot.

1
2
3
4
5
6
7
8
Cross section of an ON3P Tour Layup ski showing its layers
1
2
3
4
5
6
7
8
9

Bamboo-Paulownia Hybrid Core

Tour Layup skis run a vertically laminated bamboo and paulownia hybrid core. Paulownia takes weight out of the ski for the climb; bamboo keeps the damp, powerful, responsive feel that defines every ON3P.

CNC-Milled Bamboo Mounting Plate

A CNC-milled bamboo plate sits in the core under the binding zone. It gives the screws solid material to bite in a lighter core, so a touring ski holds its bindings like a resort ski.

1.4mm Base

Tour Layup skis run a 1.4mm Durasurf 4001 base, the same material as our resort skis with less of it, to save weight on the way up while keeping the glide and impact protection on the way down.

2.2mm x 2.0mm Ski Edge

For 26/27, Tour Layup skis move to a 2.2mm x 2.0mm steel edge: more strength and more retunes over the life of the ski for minimal added weight. The 3/4 wrap lets the tips flex, which lowers the risk of delamination.

Full Length UHMW Sidewall

Full length, full height UHMW sidewalls are more abrasion resistant than steel while still allowing torsional flex. Ultra High Molecular Weight Polyethylene is the same material used in armored vehicles, and it absorbs and resists impact better than any other sidewall material we have tested (sorry, ABS).

(3) Layers of VDS

Three layers of VDS rubber run along the edges and sidewalls as a shear layer, improving bond strength between materials and damping vibration through the ski.

2800 Hybrid Composite

Our proprietary custom weave, a triaxial fiberglass and carbon composite, runs 4-inch wide stringers the full length of the ski for balanced torsional and longitudinal stiffness: all the pop you can handle, without added weight.

ISOSPORT 8210 Pi19 Topsheet

Every ON3P topsheet is sublimated in-house and hand-sanded, so every graphic is printed in our building and finished by hand to look better for longer.

Extra Wide Binding Mat

An additional layer of double-bias fiberglass under the binding zone increases screw retention and prevents pullouts. We run the mat full width on every ski, so any hole pattern lands on reinforced material, with added torsional stiffness and power transfer underfoot.

1
2
3
4
5
6
7
8
9

Want the Oski 102 your way?

Any length we press, your choice of rocker, over 275 topsheets and 90 bases. Same shape, built to order.

Build a custom Oski 102