BILLY GOAT 114

The resort Goat does what it wants.

The Billy Goat 114 is our resort soft-snow specialist: a 114mm directional powder ski built to float in soft snow, pivot through tight terrain, and hold up in variable conditions.

The Billy Goat 114 features the Reverse Elliptical Sidecut that defines the series: a large convex arc from boot center to the tip that keeps the ski catch-free in soft snow, paired with a traditional tail radius that still holds an edge on the groomer home. Signature Pow Rocker helps the ski plane early and pivot easily, while low camber underfoot keeps it loose and maneuverable without giving up drive through chop and crust. A directional mount and supportive platform suit skiers who want to steer a powder ski from the front and still trust it when the snow turns. This is the Billy Goat with the most range, built for soft-snow days, tight trees, and the variable weeks between storms.

$949.00
/
In stock.
Add bindingsBrakes shown fit the 114mm waist. ClampCombo saves $50 at checkout.
LOOK Pivot 2.0 15 GW 115mm brake. DIN 6 to 15 $499.95

Find your length

Add your height and weight.

Every Billy Goat 114 is built with our custom 2800 hybrid fiberglass/carbon composite, a 100% bamboo core, full-length UHMW sidewalls, and the thickest bases and edges in skiing. The result is a stable, drivable, and durable soft-snow ski designed to take a beating.

Want it in your size, rocker profile, and graphic? Build it custom, from $1,099.

Handbuilt in Portland, Oregon

Since day one, every pair of ON3P skis has been built by hand in our NE Portland factory, a space we designed and built out ourselves. Every topsheet, base, and core goes from concept to finished ski under one roof, by a small crew of ski builders.

Two-year warranty

We stand behind every pair we build. Every ski carries a two-year warranty against defects in materials and workmanship.

Thickest bases and edges in skiing

Every stock ski is built with a 1.8mm Durasurf base and 2.5mm x 2.5mm hardened steel edges, the thickest base and edges in skiing. More base and edge to absorb impacts, rock shots, and retunes means more seasons of hard skiing.

Pay in installments

Split your purchase into payments with Shop Pay Installments. Options appear at checkout.

LengthTipWaistTailRadiusEffective edgeMount from centerWeight per ski
176 cm 139114122 27.8 m1325 mm -9.75 cm 2000 g
181 cm 140114123 28.4 m1370 mm -10 cm 2100 g
186 cm 141114123 29 m1415 mm -10.25 cm 2235 g
191 cm 142114124 29.6 m1460 mm -10.5 cm 2330 g

Is the Billy Goat 114 your ski

The Billy Goat 114 is your ski if
Consider instead
You prioritize soft resort days, trees, chop, and variable powder conditions
Billy Goat 118Choose it for more float, power, and a stronger focus on true powder days
You want a directional platform that pivots easily while being drivable and supportive
Woodsman 108Choose it for better all-mountain range, increased versatility, and stronger performance on firm snow
You need soft-snow range without the heft of a wider powder ski
Jeffrey 112Choose it for a progressive mount, full twin, and a more playful soft-snow feel

Ski design

Rocker profile
Signature Pow Rocker

Signature Pow Rocker is the soft-snow update to our Signature Rocker: pressed with more tip and tail rise and lower camber for more float, easier smears, and a smoother ride in powder. Floaty, surfy, and easy to steer. On the Billy Goat 114, this profile planes early and pivots through tight terrain, with camber underfoot to drive through variable snow.

Signature Pow rocker profile
Sidecut design
Reverse Elliptical Sidecut

Reverse Elliptical Sidecut (RES) is a large convex elliptical arc that runs from boot center to the tip taper, paired with a long traditional sidecut radius in the tail. In the front half of the ski the sidecut moves outward and tightens as it approaches the tip, so the ski stays catch free in powder and soft snow. The traditional tail sidecut gets you to and from the lift. Laid on edge, the RES tip and the tail radius work together into one turn radius with surprisingly strong edge hold. On the Billy Goat 114, the reverse tip keeps it catch-free in soft snow. On the groomer home, the traditional tail radius gives it real edge hold.

Reverse Elliptical Sidecut

ON3P SKI CONSTRUCTION

Cross section of an ON3P ski showing its layers
1
2
3
4
5
6
7
8

100% Bamboo Core

The heart of every stock ON3P is a vertically laminated, 100% bamboo core, cut and laminated in our Portland shop. Exceptionally strong, technically a grass, and the backbone of our trademark feel since day one: damp, powerful, responsive.

1.8mm Durasurf Base

Every stock ski runs a 1.8mm Durasurf 4001 base, the thickest base in skiing. More material means more glide, more protection from rock strikes, and more stone grinds before the ski is done.

2.5mm x 2.5mm Ski Edge

Our 2.5mm x 2.5mm Rockwell 48 steel edges are the thickest edges in skiing. The 3/4 wrap lets the tips flex, which lowers the risk of delamination where skis take the most abuse.

Full Length UHMW Sidewall

Full length, full height UHMW sidewalls are more abrasion resistant than steel while still allowing torsional flex. Ultra High Molecular Weight Polyethylene is the same material used in armored vehicles, and it absorbs and resists impact better than any other sidewall material we have tested (sorry, ABS).

(3) Layers of VDS

Three layers of VDS rubber run along the edges and sidewalls as a shear layer, improving bond strength between materials and damping vibration through the ski.

2800 Hybrid Composite

Our proprietary custom weave, a triaxial fiberglass and carbon composite, runs 4-inch wide stringers the full length of the ski for balanced torsional and longitudinal stiffness: all the pop you can handle, without added weight.

ISOSPORT 8210 Pi19 Topsheet

Every ON3P topsheet is sublimated in-house and hand-sanded, so every graphic is printed in our building and finished by hand to look better for longer.

Extra Wide Binding Mat

An additional layer of double-bias fiberglass under the binding zone increases screw retention and prevents pullouts. We run the mat full width on every ski, so any hole pattern lands on reinforced material, with added torsional stiffness and power transfer underfoot.

1
2
3
4
5
6
7
8
Cross section of an ON3P Tour Layup ski showing its layers
1
2
3
4
5
6
7
8
9

Bamboo-Paulownia Hybrid Core

Tour Layup skis run a vertically laminated bamboo and paulownia hybrid core. Paulownia takes weight out of the ski for the climb; bamboo keeps the damp, powerful, responsive feel that defines every ON3P.

CNC-Milled Bamboo Mounting Plate

A CNC-milled bamboo plate sits in the core under the binding zone. It gives the screws solid material to bite in a lighter core, so a touring ski holds its bindings like a resort ski.

1.4mm Base

Tour Layup skis run a 1.4mm Durasurf 4001 base, the same material as our resort skis with less of it, to save weight on the way up while keeping the glide and impact protection on the way down.

2.2mm x 2.0mm Ski Edge

For 26/27, Tour Layup skis move to a 2.2mm x 2.0mm steel edge: more strength and more retunes over the life of the ski for minimal added weight. The 3/4 wrap lets the tips flex, which lowers the risk of delamination.

Full Length UHMW Sidewall

Full length, full height UHMW sidewalls are more abrasion resistant than steel while still allowing torsional flex. Ultra High Molecular Weight Polyethylene is the same material used in armored vehicles, and it absorbs and resists impact better than any other sidewall material we have tested (sorry, ABS).

(3) Layers of VDS

Three layers of VDS rubber run along the edges and sidewalls as a shear layer, improving bond strength between materials and damping vibration through the ski.

2800 Hybrid Composite

Our proprietary custom weave, a triaxial fiberglass and carbon composite, runs 4-inch wide stringers the full length of the ski for balanced torsional and longitudinal stiffness: all the pop you can handle, without added weight.

ISOSPORT 8210 Pi19 Topsheet

Every ON3P topsheet is sublimated in-house and hand-sanded, so every graphic is printed in our building and finished by hand to look better for longer.

Extra Wide Binding Mat

An additional layer of double-bias fiberglass under the binding zone increases screw retention and prevents pullouts. We run the mat full width on every ski, so any hole pattern lands on reinforced material, with added torsional stiffness and power transfer underfoot.

1
2
3
4
5
6
7
8
9

Want the Billy Goat 114 your way?

Any length we press, your choice of rocker, over 275 topsheets and 90 bases. Same shape, built to order.

Build a custom Billy Goat 114