JEFFREY 92 skis: topsheet graphic, base, and side profile
JEFFREY 92 tails, topsheet graphic detail
JEFFREY 92 tips, topsheet graphic detail
JEFFREY 92 side profile showing tip and tail rocker
JEFFREY 92 skis: topsheet graphic, base, and side profile
JEFFREY 92 tails, topsheet graphic detail
JEFFREY 92 tips, topsheet graphic detail
JEFFREY 92 side profile showing tip and tail rocker

JEFFREY 92

The hard-snow twin with freestyle DNA.

The Jeffrey 92 is our progressive all-mountain twin: a 92mm ski built for speed and wired for control on hardpack.

The foundation of our narrowest Jeffrey is Ripper Rocker: 25% more camber, 10% more contact length, and 15% lower tip and tail rocker than our Signature Rocker to tighten grip and add pop in firm conditions. For 26/27, an updated Bi-Radius Sidecut boosts edge hold and a new flex profile adds torsional stiffness for a more capable hardpack ski. Delta Taper keeps the tails easy to pivot in tight terrain and moguls. This is the Jeffrey for skiers on firm snow who want precision without losing the twin tip feel. It’s a bad day to be corduroy.

$899.00
/
Length
Graphic
Preorder. Expected to ship ~October 9.
Add bindingsBrakes shown fit the 92 mm waist. ClampCombo saves $50 at checkout.
Added LOOK Pivot 2.0 15 GW 95mm brake. DIN 6 to 15 $499.95

Find your length

Add your height and weight.

Every Jeffrey 92 is built with our custom 2800 hybrid fiberglass/carbon, our proprietary composite weave that improves strength and durability while decreasing weight. Pair that with our trademark 100% bamboo core, full-length UHMW sidewalls, and the thickest bases and edges in skiing, and you have one of the most durable and capable freestyle skis on the mountain.

Want it in your size, rocker profile, and graphic? Build it custom, from $1,099.

Handbuilt in Portland, Oregon

Since day one, every pair of ON3P skis has been built by hand in our NE Portland factory, a space we designed and built out ourselves. Every topsheet, base, and core goes from concept to finished ski under one roof, by a small crew of ski builders.

Two-year warranty

We stand behind every pair we build. Every ski carries a two-year warranty against defects in materials and workmanship.

Thickest bases and edges in skiing

Every stock ski is built with a 1.8mm Durasurf base and 2.5mm x 2.5mm hardened steel edges, the thickest base and edges in skiing. More base and edge to absorb impacts, rock shots, and retunes means more seasons of hard skiing.

Pay in installments

Split your purchase into payments with Shop Pay Installments. Options appear at checkout.

LengthTipWaistTailRadiusEffective edgeMount from centerWeight per ski
171 cm 12392116 16.9 m1355 mm -3.5 cm 1650 g
176 cm 12492117 17.4 m1400 mm -3.75 cm 1725 g
181 cm 12592117 17.9 m1445 mm -4 cm 1810 g
186 cm 12692118 18.5 m1490 mm -4.25 cm 1910 g
Updates for 26/274 items
  • Bi-Radius Sidecut. More consistent edge hold through the turn
  • Updated Flex Profile. Stiffer underfoot and through the forebody, a touch softer in the tips, for more torsional stiffness and edge hold without losing playfulness
  • Delta Taper. Easier to pivot the tails in tight terrain and moguls
  • VDS rubber. Two additional layers in the tips and tails for increased strength and durability

Is the Jeffrey 92 your ski

The Jeffrey 92 is your ski if
Consider instead
You ski mostly firm snow and want quick, precise edge changes without losing a playful feel
Jeffrey 98Choose it for more float, stability, and do-it-all range when the mountain softens up
You want a progressive mount with enough balance for occasional park laps
Oski 102Choose it for a more centered mount and a stronger focus on aggressive park skiing
You prefer grip on hard snow and extra pop over float and soft snow versatility
Woodsman 92Choose it for a directional mount, stronger tail, and increased stability

Ski design

Rocker profile
Ripper Rocker

Ripper Rocker is the hard-snow counterpart to Signature Rocker: shorter tip and tail rocker, lower tip and tail heights, and higher camber, which adds edge hold on hardpack, more pop, and stability at speed and on landings. Stable, powerful, and precise. On the Jeffrey 92, this profile puts more contact length on snow, giving a hard-snow twin that grips, pops, and stays composed at speed on bulletproof days.

Ripper rocker profile
Sidecut design
Bi-Radius Sidecut

The sidecut pairs a smaller turn radius in the tip with a larger turn radius in the tail, creating an all-mountain ski that is stable going straight but carves easily once the turn is initiated and the ski is on edge. On the Jeffrey 92, the tighter tip radius bites early on hardpack. The updated bi-radius holds the turn shape better through the ski, while the more balanced tail radius finishes the turn with a strong, stable exit.

Bi-Radius Sidecut

ON3P SKI CONSTRUCTION

Cross section of an ON3P ski showing its layers
1
2
3
4
5
6
7
8

100% Bamboo Core

The heart of every stock ON3P is a vertically laminated, 100% bamboo core, cut and laminated in our Portland shop. Exceptionally strong, technically a grass, and the backbone of our trademark feel since day one: damp, powerful, responsive.

1.8mm Durasurf Base

Every stock ski runs a 1.8mm Durasurf 4001 base, the thickest base in skiing. More material means more glide, more protection from rock strikes, and more stone grinds before the ski is done.

2.5mm x 2.5mm Ski Edge

Our 2.5mm x 2.5mm Rockwell 48 steel edges are the thickest edges in skiing. The 3/4 wrap lets the tips flex, which lowers the risk of delamination where skis take the most abuse.

Full Length UHMW Sidewall

Full length, full height UHMW sidewalls are more abrasion resistant than steel while still allowing torsional flex. Ultra High Molecular Weight Polyethylene is the same material used in armored vehicles, and it absorbs and resists impact better than any other sidewall material we have tested (sorry, ABS).

(3) Layers of VDS

Three layers of VDS rubber run along the edges and sidewalls as a shear layer, improving bond strength between materials and damping vibration through the ski.

2800 Hybrid Composite

Our proprietary custom weave, a triaxial fiberglass and carbon composite, runs 4-inch wide stringers the full length of the ski for balanced torsional and longitudinal stiffness: all the pop you can handle, without added weight.

ISOSPORT 8210 Pi19 Topsheet

Every ON3P topsheet is sublimated in-house and hand-sanded, so every graphic is printed in our building and finished by hand to look better for longer.

Extra Wide Binding Mat

An additional layer of double-bias fiberglass under the binding zone increases screw retention and prevents pullouts. We run the mat full width on every ski, so any hole pattern lands on reinforced material, with added torsional stiffness and power transfer underfoot.

1
2
3
4
5
6
7
8
Cross section of an ON3P Tour Layup ski showing its layers
1
2
3
4
5
6
7
8
9

Bamboo-Paulownia Hybrid Core

Tour Layup skis run a vertically laminated bamboo and paulownia hybrid core. Paulownia takes weight out of the ski for the climb; bamboo keeps the damp, powerful, responsive feel that defines every ON3P.

CNC-Milled Bamboo Mounting Plate

A CNC-milled bamboo plate sits in the core under the binding zone. It gives the screws solid material to bite in a lighter core, so a touring ski holds its bindings like a resort ski.

1.4mm Base

Tour Layup skis run a 1.4mm Durasurf 4001 base, the same material as our resort skis with less of it, to save weight on the way up while keeping the glide and impact protection on the way down.

2.2mm x 2.0mm Ski Edge

For 26/27, Tour Layup skis move to a 2.2mm x 2.0mm steel edge: more strength and more retunes over the life of the ski for minimal added weight. The 3/4 wrap lets the tips flex, which lowers the risk of delamination.

Full Length UHMW Sidewall

Full length, full height UHMW sidewalls are more abrasion resistant than steel while still allowing torsional flex. Ultra High Molecular Weight Polyethylene is the same material used in armored vehicles, and it absorbs and resists impact better than any other sidewall material we have tested (sorry, ABS).

(3) Layers of VDS

Three layers of VDS rubber run along the edges and sidewalls as a shear layer, improving bond strength between materials and damping vibration through the ski.

2800 Hybrid Composite

Our proprietary custom weave, a triaxial fiberglass and carbon composite, runs 4-inch wide stringers the full length of the ski for balanced torsional and longitudinal stiffness: all the pop you can handle, without added weight.

ISOSPORT 8210 Pi19 Topsheet

Every ON3P topsheet is sublimated in-house and hand-sanded, so every graphic is printed in our building and finished by hand to look better for longer.

Extra Wide Binding Mat

An additional layer of double-bias fiberglass under the binding zone increases screw retention and prevents pullouts. We run the mat full width on every ski, so any hole pattern lands on reinforced material, with added torsional stiffness and power transfer underfoot.

1
2
3
4
5
6
7
8
9

Want the Jeffrey 92 your way?

Any length we press, your choice of rocker, over 275 topsheets and 90 bases. Same shape, built to order.

Build a custom Jeffrey 92