Empty shop during our first shop build last year.

Shop at the end of production last year.

Starting the break everything down and reposition the shop.

Starting to work on our new "hot bench" - last year our hotbox seemed like a huge waste of space. So this year we decided to put two different hot boxes built underneath two of our finishing stations.

Two sides almost done.

"Hot bench" looking good.

Finishing breaking down the back and repositioning the ski presses.

Framing up our sidewall bench/storage rack.

Starting to attach shelves.

Starting to frame our core & mold rack. We had a huge shortage of storage last year, so needed to make sure we didn't run into storage issues again.

Welding up some new storage racks.

Mold racking finished. Now onto the core racks.

Painting some of our new storage racks. Sticking with the Swedish theme.

Start of the new dust collection line. We took everything down and redesigned the line. Luckily we had far few drops this year than last, so the system was a bit easier to put together.

Even with good dust collection, cutting out skis can be a pretty nasty process. To help keep the rest of the shop free of fiberglass/epoxy dust, we closed off a space for the band saw/jig saw stations.

Another issue we had last year was little curly-q's of base material. They get everywhere. This year we built the base/edge stations their own room to help contain them.

We added some windows so the space was a bit more friendly to work in.

Finished space with two new edging stations.

Finishesd (albeit messy) Core and Mold Rack.

We added two new wet grinders - one for tips and another for bases.

Space starting to come together.

A couple people have asked about the Vicik's tip rocker and tails...so here you go.

Very minor twin.

One of the simple things we changed this year was pulling the presses a few inches off the walls. I cannot tell you how much easier they are to work on.

Adding a floor drop and dust collection for the band saw.

New topsheet and base storage rack. And yes, it is tall.

Storage rack/sidewall bench. Space to store tons of materials and attach sidewalls and tipspacers before layup.

Two new base/edging stations.

Bamboo waiting to go to the CNC.

New cassette rack.

Base/side edge and tip shaping station.

New layup bench.

Room of death - as I've now named the flash trimming room.

2 of the 4 finishing stations and hot bench.

Planer and Router drops.

Looking down from above.

Blue Steele Base.

Vicik Base.

Caylor Base.

Cease & Desist Base.

Jeronimo Base.

Wrenegade Base.

Billy Goat Base.